你的位置: Home // cisco, 资源共享 // CCNA:640-802“例题”分析3(CCNA考生必看)

CCNA:640-802“例题”分析3(CCNA考生必看)

分享到新浪微博

-0002
1.This topology contains 3 routers and 1 switch. Complete the topology
Drag the appropriate device icons to the locations labeled Device.
Drag the appropriate connections to the locations labeled Connections
Drag the appropriate IP addresses to the locations labeled IP Address.(Hint : Use the given host addresses and the Prime router information given)
To remove a device or connection,drag it away from the topology.

2.Use information gathered from the Prime router to complete the configuration of any additional routers. No passwords are required to access the Prime router .
The config terminal command has been disabled for the HQ router.This router does not require configuration.
Configure each additional router with the following

该题在解答过程中要注意IP的变化。此题IP及中间那台路由器名称会经常变动。请注意。

后面会把最近的几种变种题发出来给大家比较一下。
下面先看一下这题的解法:

1.首先在右侧的CLI界面输入命令en show run。可以看到一些对解题有帮助的信息。
如图所示,在右侧使用了show run命令后,看到的信息,我们需要了解Prime这台路由器的F0/0和S0/0接口的IP配置信息,然后由此来判断相应接口的对端IP。
F0/0:192.168.142.94/28
S0/0:192.168.142.174/28
可以简单看一下左侧下面的IP地址块,所有的IP选项,子网掩码均为/28,换算成十进制就是255.255.255.240。
根据F0/0口的IP,可以算出该接口所处于的网段号:192.168.142.80/28
根据S0/0口的IP,可以算出该接口所处于的网段号:192.168.142.160/28
Prime左侧的Device的F0/0接口的IP和Prime的F0/0口的IP位于相同网段中,由此可知该设备的F0/0的IP为:192.168.142.80~192.168.142.93之间(答案为:192.168.142.81/28)
同理,Prime 右侧的Device的S0/0接口IP为:192.168.142.160~192.168.142.173(答案为:192.168.142.161/24)

2.由下方PC的IP来判断两台Device剩余接口的IP。方法同上。
左侧下方PC的IP:192.168.142.17/28 。所处的网段号为192.168.142.16/28,该网段的IP范围是:192.168.142.17~192.168.142.30 . (该PC所连的Device的F0/1接口的IP为:192.168.142.30/28)
右侧下方PC的IP:192.168.142.65/28。所处的网段号为192.168.142.64/28,该网段的IP范围是:192.168.142.65~192.168.142.78. (该PC所连的Device的F0/0接口的IP为:192.168.142.78/28)

3.然后就开始确定连接线缆。该题提供了四种线缆供我们选择,分别是:
3.1 Straight-through
3.2 Cross over
3.3 Roll over
3.4 Serial
路由器Prime与左侧Device相连使用的是Fastethernet接口,而且Prime和Device属于同层设备,那么它们之间使用Cross over相连.
路由器Prime与右侧Device相连使用的是Serial接口,那么它们之间使用Serial相连
左侧Device与PCA相连,且左侧Device与PCA属于同层设备,那么它们之间使用Cross over相连
右侧Device与下方的一台layer2设备相连,它们属于不同层设备,那么它们之间使用Straight-through相连。

在此类题目中,主要考察考生对IP地址计算的能力。没有太多的技巧,该题型的掩码固定不变,全为/28。只要算出网络号,确定了该网段的地址范围,就可以很顺利的把所有的IP地址确定下来。下面把该类题所有其他的变形发出来。比较一下即可:
A.

B.

C.

本文热度: 1%

相关日志

点击此处,关注我的围脖
分类 : cisco, 资源共享 标签 : , ,

2 条评论 to "CCNA:640-802“例题”分析3(CCNA考生必看)"

  1. 8log 说:

    好久没有关注CCNA考试了,现在居然也分类了,无线网络,voip还有个啥? [:)1b]

    回复该评论

    兜兜里有糖 reply on 七月 30th, 2008 23:28:

    无线,语音还有安全.
    真搞笑.
    今天看了几道语音的题,绝对不是基础那么简单.
    Cisco已经抬高门槛了.

    不过CCNA细分方向,又能为他带来一笔不菲的认证收入,而且也是一次极具战略意义的市场渗透.

    以后要考P系列的兄弟们要辛苦了.

    回复该评论

留下评论

Copyright © 2009 Let's gotolab! . All rights reserved.
Designed by Theme Junkie . Powered by WordPress.